Product Technical Description

SRC is a multi-purpose alkaline decontamination cleaner which can remove rust, grease, and carbon scale at once, which saves on operation time. Carbide performance can replace pickling and other solvents, will not have adverse effects of irritating odor and insoluble powder, agglomeration and other problems. Has high-quality cleaning performance and is safe for the environment.

Description

This product is an alkaline white powder containing detergent, silicate, surfactant and chelating agent. It has chemical stability and low foaming characteristics that help with spraying, immersion, and ultrasonic vibration for excellent performance. It is easy to dilute and can be evenly mixed with cold water while maintaining high stability. SRC will not form scaling on the edge of the cleaning tank and will not cause secondary pollution.

Advantages and Features

It has a special formula with a strong penetration ability which can effectively remove dirt between the mold surface and the gap. There will be no irritating odor, insoluble powder, agglomeration, and other problems during use. The product has an excellent effect on cleaning the grease and carbon scale specifically on mold. It is best used as a solution in the mold cleaning tank of a chemical fiber factory, specifically for steam cleaning, pressure spray cleaning, or ultrasonic vibration equipment cleaning.

Instructions for Use/Recommended Concentration For Chemical Fiber Factory Manufacturing Spare Parts:

Steam Cleaning	Diluted Concentration of 1:10
Ultrasonic Vibration Cleaning	Diluted Concentration of 1:20

* The concentration varies according to the type of oil pollution, cleaning temperature and time. Please adjust concentration according to your actual needs.

Precautions

When preparing to add this powder, be careful to add the powder as close to the liquid surface as possible so as to prevent splashing. Do not add a large amount of powder at a time, rather add in small increments for several times. Be careful to not directly add heat above 45ºC to prevent the liquid splashing and bubbling. This solvent is strongly alkaline, so be careful when handling this product, recommended to operate with protective eyewear and gloves. If solvent accidentally comes in contact with skin, immediately rinse with a large amount of water. If it splashes into the eyes, rinse with water for at least 15 minutes and seek medical attention immediately after cleaning. If this solvent is accidentally swallowed, rinse the mouth with plenty of water, attempt to expel product by inducing vomiting, drink plenty of water and seek medical attention immediately.

Packing/Quantity 100kg/drum